ECE 22.06
The ECE 22.06 safety standard for motorbike helmets has been in force since June 2022. This means that new helmets will only be tested in accordance with the new safety standard. Helmets with the 22.05 certification may of course still be used.
Changes:
- In ECE 22.05, 5 points on the helmet were tested (Front, top, back, sides and chin). With the new directive, a total of 18 positions will now be tested.
- The test objects have also changed. It is no longer "just" an anvil that is shot at the helmet, but the objects now have different shapes (rod-shaped, step-shaped, flat) to simulate several impact variants.
- Flip-up helmets (modular helmets) are tested with and without a chin section, which is where the P/J homologation comes into play, i.e. whether this helmet is approved as a jet helmet, full-face helmet or both.
- Visiers are put under greater scrutiny. They have to withstand an impact of up to 80 m/s with a 6 mm steel ball without breaking. If the visor breaks, there must be no splinters.
- Neu is that oblique impacts are also analysed, i.e. all those impacts in which the head hits an object at an angle and not vertically. According to the latest industry studies, it is precisely these impacts that cause the most severe brain damage due to the strong rotation of the head (rotational acceleration or rotational acceleration)
- The new standard stipulates that communication systems or other helmet accessories - whether worn externally or inside the shell - must be approved together with the helmet. Intercom systems that have not been tested together with the helmet model on which they are mounted are therefore no longer permitted. As soon as ECE 22-06 will be in force as the only valid approval standard, it is essential that the fitting of communication systems and other retrofit accessories be approved by the helmet manufacturer, based on the list of accessories with which the helmet has been approved.
- Different impact speeds are tested. The helmet should not only protect at high speeds, but also at low speeds.
- The field of vision of a helmet must not fall below the threshold value. It is worth mentioning at this point that the new approval provides for tests on visual distortion, scratch resistance and light refraction. Not only for the visor, but also for the sun visor.
Products with ECE 22.06 approval
The i71 sets new standards for a sports touring model with its new, slim shell design. The advanced polycarbonate helmet now has 3 outer shells and 6 available sizes to optimise weight and comfort for the rider. The rearranged upper ventilation opening and the enlarged chin ventilation opening enable improved air supply and ventilation. Also new on the i71 are the visor and sun visor. The HJ-38 Pinlock visor is equipped with a new push-and-slide closure system that ensures greater safety, yet is easy to operate even when wearing gloves. The new sun visor (HJ-V12) offers the rider the option of adjusting the sun visor forwards in 3 positions (up to 10 mm) to ensure ideal sun visor protection. The i71 is also compatible with the second generation Smart HJC Bluetooth systems. STANDARD ECE 22.06 Meets or exceeds ECE 22.06 approval. The test includes energy attenuation, penetration resistance, structural integrity of the chin strap and labelling requirements for motorbike helmets for road use. NEW SUNVISOR MECHANISM Integrated sun visor: Anti-fog coating smoke tinted SUN visor deploys quickly and easily by bottom positioned new operation system. Its new mechanism allows you to adjust the depth in 3 different positions according to your morphology and preference for an optimal fit. VISOR LOCK (PUSH & RELEASE SYSTEM) The new lock visor is easier to open and safer thanks to its push-and-release System. SMART HJC 2. GENERATION The 2nd generation SMART HJC premium Bluetooth communication system models feature an all-in-one design that is fully integrated into the helmet so you can feel the optimal weight distribution and aerodynamic performance while riding. The SMART HJC 50B and 21B can be installed on RPHA 71, RPHA 91, RPHA 31 or i71. Developed together with SENA and customised for HJC helmets. *All SMART HJC devices are sold separately.
€269.99*
The i71 sets new standards for a sports touring model with its new, slim shell design. The advanced polycarbonate helmet now has 3 outer shells and 6 available sizes to optimise weight and comfort for the rider. The rearranged upper ventilation opening and the enlarged chin ventilation opening enable improved air supply and ventilation. Also new on the i71 are the visor and sun visor. The HJ-38 Pinlock visor is equipped with a new push-and-slide closure system that ensures greater safety, yet is easy to operate even when wearing gloves. The new sun visor (HJ-V12) offers the rider the option of adjusting the sun visor forwards in 3 positions (up to 10 mm) to ensure ideal sun visor protection. The i71 is also compatible with the second generation Smart HJC Bluetooth systems. STANDARD ECE 22.06 Meets or exceeds ECE 22.06 approval. The test includes energy attenuation, penetration resistance, structural integrity of the chin strap and labelling requirements for motorbike helmets for road use. NEW SUNVISOR MECHANISM Integrated sun visor: Anti-fog coating smoke tinted SUN visor deploys quickly and easily by bottom positioned new operation system. Its new mechanism allows you to adjust the depth in 3 different positions according to your morphology and preference for an optimal fit. VISOR LOCK (PUSH & RELEASE SYSTEM) The new lock visor is easier to open and safer thanks to its push-and-release System. SMART HJC 2. GENERATION The 2nd generation SMART HJC premium Bluetooth communication system models feature an all-in-one design that is fully integrated into the helmet so you can feel the optimal weight distribution and aerodynamic performance while riding. The SMART HJC 50B and 21B can be installed on RPHA 71, RPHA 91, RPHA 31 or i71. Developed together with SENA and customised for HJC helmets. *All SMART HJC devices are sold separately.
€229.99*
The i71 sets new standards for a sports touring model with its new, slim shell design. The advanced polycarbonate helmet now has 3 outer shells and 6 available sizes to optimise weight and comfort for the rider. The rearranged upper ventilation opening and the enlarged chin ventilation opening enable improved air supply and ventilation. Also new on the i71 are the visor and sun visor. The HJ-38 Pinlock visor is equipped with a new push-and-slide closure system that ensures greater safety, yet is easy to operate even when wearing gloves. The new sun visor (HJ-V12) offers the rider the option of adjusting the sun visor forwards in 3 positions (up to 10 mm) to ensure ideal sun visor protection. The i71 is also compatible with the second generation Smart HJC Bluetooth systems. STANDARD ECE 22.06 Meets or exceeds ECE 22.06 approval. The test includes energy attenuation, penetration resistance, structural integrity of the chin strap and labelling requirements for motorbike helmets for road use. NEW SUNVISOR MECHANISM Integrated sun visor: Anti-fog coating smoke tinted SUN visor deploys quickly and easily by bottom positioned new operation system. Its new mechanism allows you to adjust the depth in 3 different positions according to your morphology and preference for an optimal fit. VISOR LOCK (PUSH & RELEASE SYSTEM) The new lock visor is easier to open and safer thanks to its push-and-release System. SMART HJC 2. GENERATION The 2nd generation SMART HJC premium Bluetooth communication system models feature an all-in-one design that is fully integrated into the helmet so you can feel the optimal weight distribution and aerodynamic performance while riding. The SMART HJC 50B and 21B can be installed on RPHA 71, RPHA 91, RPHA 31 or i71. Developed together with SENA and customised for HJC helmets. *All SMART HJC devices are sold separately.
€269.99*
Only 2 available
The i71 sets new standards for a sports touring model with its new, slim shell design. The advanced polycarbonate helmet now has 3 outer shells and 6 available sizes to optimise weight and comfort for the rider. The rearranged upper ventilation opening and the enlarged chin ventilation opening enable improved air supply and ventilation. Also new on the i71 are the visor and sun visor. The HJ-38 Pinlock visor is equipped with a new push-and-slide closure system that ensures greater safety, yet is easy to operate even when wearing gloves. The new sun visor (HJ-V12) offers the rider the option of adjusting the sun visor forwards in 3 positions (up to 10 mm) to ensure ideal sun visor protection. The i71 is also compatible with the second generation Smart HJC Bluetooth systems. STANDARD ECE 22.06 Meets or exceeds ECE 22.06 approval. The test includes energy attenuation, penetration resistance, structural integrity of the chin strap and labelling requirements for motorbike helmets for road use. NEW SUNVISOR MECHANISM Integrated sun visor: Anti-fog coating smoke tinted SUN visor deploys quickly and easily by bottom positioned new operation system. Its new mechanism allows you to adjust the depth in 3 different positions according to your morphology and preference for an optimal fit. VISOR LOCK (PUSH & RELEASE SYSTEM) The new lock visor is easier to open and safer thanks to its push-and-release System. SMART HJC 2. GENERATION The 2nd generation SMART HJC premium Bluetooth communication system models feature an all-in-one design that is fully integrated into the helmet so you can feel the optimal weight distribution and aerodynamic performance while riding. The SMART HJC 50B and 21B can be installed on RPHA 71, RPHA 91, RPHA 31 or i71. Developed together with SENA and customised for HJC helmets. *All SMART HJC devices are sold separately.
€269.99*
The i71 sets new standards for a sports touring model with its new, slim shell design. The advanced polycarbonate helmet now has 3 outer shells and 6 available sizes to optimise weight and comfort for the rider. The rearranged upper ventilation opening and the enlarged chin ventilation opening enable improved air supply and ventilation. Also new on the i71 are the visor and sun visor. The HJ-38 Pinlock visor is equipped with a new push-and-slide closure system that ensures greater safety, yet is easy to operate even when wearing gloves. The new sun visor (HJ-V12) offers the rider the option of adjusting the sun visor forwards in 3 positions (up to 10 mm) to ensure ideal sun visor protection. The i71 is also compatible with the second generation Smart HJC Bluetooth systems. STANDARD ECE 22.06 Meets or exceeds ECE 22.06 approval. The test includes energy attenuation, penetration resistance, structural integrity of the chin strap and labelling requirements for motorbike helmets for road use. NEW SUNVISOR MECHANISM Integrated sun visor: Anti-fog coating smoke tinted SUN visor deploys quickly and easily by bottom positioned new operation system. Its new mechanism allows you to adjust the depth in 3 different positions according to your morphology and preference for an optimal fit. VISOR LOCK (PUSH & RELEASE SYSTEM) The new lock visor is easier to open and safer thanks to its push-and-release System. SMART HJC 2. GENERATION The 2nd generation SMART HJC premium Bluetooth communication system models feature an all-in-one design that is fully integrated into the helmet so you can feel the optimal weight distribution and aerodynamic performance while riding. The SMART HJC 50B and 21B can be installed on RPHA 71, RPHA 91, RPHA 31 or i71. Developed together with SENA and customised for HJC helmets. *All SMART HJC devices are sold separately.
€269.99*
The i71 sets new standards for a sports touring model with its new, slim shell design. The advanced polycarbonate helmet now has 3 outer shells and 6 available sizes to optimise weight and comfort for the rider. The rearranged upper ventilation opening and the enlarged chin ventilation opening enable improved air supply and ventilation. Also new on the i71 are the visor and sun visor. The HJ-38 Pinlock visor is equipped with a new push-and-slide closure system that ensures greater safety, yet is easy to operate even when wearing gloves. The new sun visor (HJ-V12) offers the rider the option of adjusting the sun visor forwards in 3 positions (up to 10 mm) to ensure ideal sun visor protection. The i71 is also compatible with the second generation Smart HJC Bluetooth systems. STANDARD ECE 22.06 Meets or exceeds ECE 22.06 approval. The test includes energy attenuation, penetration resistance, structural integrity of the chin strap and labelling requirements for motorbike helmets for road use. NEW SUNVISOR MECHANISM Integrated sun visor: Anti-fog coating smoke tinted SUN visor deploys quickly and easily by bottom positioned new operation system. Its new mechanism allows you to adjust the depth in 3 different positions according to your morphology and preference for an optimal fit. VISOR LOCK (PUSH & RELEASE SYSTEM) The new lock visor is easier to open and safer thanks to its push-and-release System. SMART HJC 2. GENERATION The 2nd generation SMART HJC premium Bluetooth communication system models feature an all-in-one design that is fully integrated into the helmet so you can feel the optimal weight distribution and aerodynamic performance while riding. The SMART HJC 50B and 21B can be installed on RPHA 71, RPHA 91, RPHA 31 or i71. Developed together with SENA and customised for HJC helmets. *All SMART HJC devices are sold separately.
€269.99*
Features: Premium Integrated Matrix / P.I.M. EVO: Reinforcement materials, including carbon aramid hybrid and natural fibre, provide improved impact resistance, more comfort and lightness of the helmet. Pinlock Ready HJ-42 visor: Provides 99% UV protection, anti-scratch coating; two-way pivot ratchet offers smooth ratchet movement and improved sealing. Aerodynamic shell structure for extreme performance at top speeds. Emergency set (cheek pads) for safe and quick rescue in emergency situations. The wider eye opening allows a larger viewing area for the rider. The inner side with advanced antibacterial fabric offers improved moisture transport and a quick-drying function. The head pad and cheek pads are removable and washable. It is equipped as standard with both 2D clear and dark smoke visor, pinlock, chin guard and wind deflector. Included in the scope of delivery: PINLOCK DARK VISOR
€549.99*
Only 2 available
Features: Premium Integrated Matrix / P.I.M. EVO: Reinforcement materials, including carbon aramid hybrid and natural fibre, provide improved impact resistance, more comfort and lightness of the helmet. Pinlock Ready HJ-42 visor: Provides 99% UV protection, anti-scratch coating; two-way pivot ratchet offers smooth ratchet movement and improved sealing. Aerodynamic shell structure for extreme performance at top speeds. Emergency set (cheek pads) for safe and quick rescue in emergency situations. The wider eye opening allows a larger viewing area for the rider. The inner side with advanced antibacterial fabric offers improved moisture transport and a quick-drying function. The head pad and cheek pads are removable and washable. It is equipped as standard with both 2D clear and dark smoke visor, pinlock, chin guard and wind deflector. Included in the scope of delivery: PINLOCK DARK VISOR
€599.99*
Only 2 available
Features: Premium Integrated Matrix / P.I.M. EVO: Reinforcement materials, including carbon aramid hybrid and natural fibre, provide improved impact resistance, more comfort and lightness of the helmet. Pinlock Ready HJ-42 visor: Provides 99% UV protection, anti-scratch coating; two-way pivot ratchet offers smooth ratchet movement and improved sealing. Aerodynamic shell structure for extreme performance at top speeds. Emergency set (cheek pads) for safe and quick rescue in emergency situations. The wider eye opening allows a larger viewing area for the rider. The inner side with advanced antibacterial fabric offers improved moisture transport and a quick-drying function. The head pad and cheek pads are removable and washable. It is equipped as standard with both 2D clear and dark smoke visor, pinlock, chin guard and wind deflector. Included in the scope of delivery: PINLOCK DARK VISOR
€649.99*
VERSATILE FLIP-UP HELMET With the NEOTEC3, SHOEI continues the series of its successful flip-up helmet models with the "TEC" in the name. Whether in everyday city traffic, on evening trips into the curvy countryside or on extended motorbike tours with like-minded people - the NEOTEC3 impresses with outstanding features for all purposes. The large integrated QSV-2 sun visor, for example, offers excellent glare protection even in low sun. Certified according to the current test standard ECE-R 22.06, the NEOTEC3 is also suitable for use with the chin bar open at adapted speeds, thanks to P/J homologation. When the helmet is completely closed, an integrated, deeply branched ventilation system provides fresh air and cooling. The revolutionary SHOEI COMLINK interface allows perfect integration of the SRL3 MESH communication system from SENA. Smooth outer surfaces and transitions keep the driver's or rider's noise exposure at a low level. The micro ratchet closure on the pleasantly narrow chin strap makes it easy to put on and take off this incomparably high-quality flip-up helmet model from SHOEI. SAFETY The outer shell of the SHOEI NEOTEC3 made of AIM (Advanced Integrated Matrix) in combination with a polystyrene core system composed of several elements with different absorption capacities offers optimum impact protection that meets the requirements of the ECE-R 22.06 test standard. The SHOEI NEOTEC3 equally fulfils the requirements of this test standard for full-face helmets and jet helmets. In addition to the recommended use with the chin bar closed, a second, stable snap-in position also allows the helmet to be used with the chin bar open and locked. The clear CNS-3C visor, mounted as standard, opens up an almost unrestricted horizontal and vertical field of vision. The anti-fog PINLOCK EVO lens supplied with the helmet ensures unobstructed vision even in adverse weather conditions. The pleasantly slim chin strap with micro ratchet closure is comfortable to use and holds the helmet securely in place. A stainless steel locking mechanism locks the chin bar securely and reliably in the closed position. WEARING COMFORT 3 different outer shell sizes (XS-M | L | XL-XXL) allow for a wide size range of the SHOEI NEOTEC3 and at the same time an optimal ratio of helmet to rider size. A good balance of the helmet protects the neck muscles and prevents fatigue, both in inner-city commuting and on extended tours or long motorbike trips. The three-dimensionally shaped center pad, the pre-shaped cheek pads with noise isolator as well as the chin strap pad are completely removable and washable. For individual adjustment of the helmet, center and cheek pads are available in different thicknesses. A pad that can be inserted in the upper head area can be used to adjust the fit of the helmet vertically. Cheek pads with a voluminous underside and extended to the back of the head, together with the removable ear pads, effectively contribute to noise reduction. The CNS-3C visor, fitted as standard, prevents draughts and rainwater from entering the helmet with its characteristic upper edge that is inclined towards the helmet shell. It can be opened without torsion and closed reliably with the centrally positioned locking mechanism. For additional fresh air while riding, the visor mechanism allows the visor to be opened a gap wide. The visor can be changed without tools thanks to the proven, self-adjusting quick-change mechanism. The integrated, high-quality QSV-2 sun visor of the SHOEI NEOTEC3 is continuously extendable and covers the usable field of vision almost completely, even downwards. It can be replaced easily and without tools by an optional yellow-tinted visor with a contrast-enhancing effect. This additional visor thus ensures optimum visibility for many uses and weather conditions. Recesses in the ear area, prepared cable guides and installation positions for the unit parts allow for easy and quick installation of the SRL3 communication system by SENA available in SHOEI's range of accessories. VENTILATION Ventilation inlets directly into the airstream take in fresh air to reduce the temperature and humidity inside the SHOEI NEOTEC3. A removable filter in the lower front ventilation prevents insects from entering. Raised ventilation controls allow the helmet to be operated even when wearing thick gloves, making it suitable for use in cold temperature zones or during the cold season. AERODYNAMICS Smooth surfaces and transitions reduce the helmet's wind resistance and the wearer's exposure to noise, but allow the integrated spoilers on the sides and back of the helmet and thus the sporty character of the SHOEI NEOTEC3 to be seen. A stable mechanism ensures an eccentric turning movement of the chin bar when opening and closing, and allows the smallest gaps between the chin bar and the helmet shell. The transition area between the chin bar and the helmet shell is smooth to reduce turbulence in the ear area and the associated noise. ACCESSORIES Visors in various tints and mirror coatings are available for the SHOEI NEOTEC3, which can be used in compliance with the ECE homologation guidelines. The helmet is equipped with a CNS-3C visor as standard. Anti-fog PINLOCK EVO lenses can be fitted in all available visors of this type, one of which is included with the helmet. The integrated, dark-tinted sun visor type QSV-2 can be exchanged for a yellow-tinted version with contrast-enhancing effect from SHOEI's range of accessories. The SHOEI range of accessories also includes cheek pads with or without noise isolator, center pads in various sizes and thicknesses, and a retractable pad for the upper head area. They can be used to replace the original pads or to adjust the fit of the helmet to individual needs. Also available are a chin strap pad, a Breath Guard and a Chin Curtain in synthetic leather. The SENA SRL3 Mesh communication system from the SHOEI accessory range can be inserted into the SHOEI COMLINK interface of the NEOTEC3. After pairing with a mobile phone, a navigation device or other intercom devices, the SRL3 Mesh offers the possibility of information and entertainment while driving and, at the same time, fits into the helmet shell of the NEOTEC3 almost invisibly. With its high-end speakers, high-quality microphone and sound system from harman/kardon, the SRL3 Mesh delivers rich sound and crystal-clear voice transmission. SCOPE OF DELIVERY Included with the SHOEI NEOTEC3 is a PINLOCK EVO lens for use with the standard CNS-3C visor, matching replacement pins and a small maintenance tool useful for installing the SRL communication system. Also included are a Breath Guard, a Chin Curtain (already fitted), SHOEI logo stickers, an original SHOEI helmet bag to store the helmet gently, and a silicone oil to care for the visor seal and mechanism. In the helmet manual as well as in the brochure " How to use your helmet properly" you will find valuable information on the use, maintenance and care of the SHOEI NEOTEC3.
€769.99*
VERSATILE FLIP-UP HELMET With the NEOTEC3, SHOEI continues the series of its successful flip-up helmet models with the "TEC" in the name. Whether in everyday city traffic, on evening trips into the curvy countryside or on extended motorbike tours with like-minded people - the NEOTEC3 impresses with outstanding features for all purposes. The large integrated QSV-2 sun visor, for example, offers excellent glare protection even in low sun. Certified according to the current test standard ECE-R 22.06, the NEOTEC3 is also suitable for use with the chin bar open at adapted speeds, thanks to P/J homologation. When the helmet is completely closed, an integrated, deeply branched ventilation system provides fresh air and cooling. The revolutionary SHOEI COMLINK interface allows perfect integration of the SRL3 MESH communication system from SENA. Smooth outer surfaces and transitions keep the driver's or rider's noise exposure at a low level. The micro ratchet closure on the pleasantly narrow chin strap makes it easy to put on and take off this incomparably high-quality flip-up helmet model from SHOEI. SAFETY The outer shell of the SHOEI NEOTEC3 made of AIM (Advanced Integrated Matrix) in combination with a polystyrene core system composed of several elements with different absorption capacities offers optimum impact protection that meets the requirements of the ECE-R 22.06 test standard. The SHOEI NEOTEC3 equally fulfils the requirements of this test standard for full-face helmets and jet helmets. In addition to the recommended use with the chin bar closed, a second, stable snap-in position also allows the helmet to be used with the chin bar open and locked. The clear CNS-3C visor, mounted as standard, opens up an almost unrestricted horizontal and vertical field of vision. The anti-fog PINLOCK EVO lens supplied with the helmet ensures unobstructed vision even in adverse weather conditions. The pleasantly slim chin strap with micro ratchet closure is comfortable to use and holds the helmet securely in place. A stainless steel locking mechanism locks the chin bar securely and reliably in the closed position. WEARING COMFORT 3 different outer shell sizes (XS-M | L | XL-XXL) allow for a wide size range of the SHOEI NEOTEC3 and at the same time an optimal ratio of helmet to rider size. A good balance of the helmet protects the neck muscles and prevents fatigue, both in inner-city commuting and on extended tours or long motorbike trips. The three-dimensionally shaped center pad, the pre-shaped cheek pads with noise isolator as well as the chin strap pad are completely removable and washable. For individual adjustment of the helmet, center and cheek pads are available in different thicknesses. A pad that can be inserted in the upper head area can be used to adjust the fit of the helmet vertically. Cheek pads with a voluminous underside and extended to the back of the head, together with the removable ear pads, effectively contribute to noise reduction. The CNS-3C visor, fitted as standard, prevents draughts and rainwater from entering the helmet with its characteristic upper edge that is inclined towards the helmet shell. It can be opened without torsion and closed reliably with the centrally positioned locking mechanism. For additional fresh air while riding, the visor mechanism allows the visor to be opened a gap wide. The visor can be changed without tools thanks to the proven, self-adjusting quick-change mechanism. The integrated, high-quality QSV-2 sun visor of the SHOEI NEOTEC3 is continuously extendable and covers the usable field of vision almost completely, even downwards. It can be replaced easily and without tools by an optional yellow-tinted visor with a contrast-enhancing effect. This additional visor thus ensures optimum visibility for many uses and weather conditions. Recesses in the ear area, prepared cable guides and installation positions for the unit parts allow for easy and quick installation of the SRL3 communication system by SENA available in SHOEI's range of accessories. VENTILATION Ventilation inlets directly into the airstream take in fresh air to reduce the temperature and humidity inside the SHOEI NEOTEC3. A removable filter in the lower front ventilation prevents insects from entering. Raised ventilation controls allow the helmet to be operated even when wearing thick gloves, making it suitable for use in cold temperature zones or during the cold season. AERODYNAMICS Smooth surfaces and transitions reduce the helmet's wind resistance and the wearer's exposure to noise, but allow the integrated spoilers on the sides and back of the helmet and thus the sporty character of the SHOEI NEOTEC3 to be seen. A stable mechanism ensures an eccentric turning movement of the chin bar when opening and closing, and allows the smallest gaps between the chin bar and the helmet shell. The transition area between the chin bar and the helmet shell is smooth to reduce turbulence in the ear area and the associated noise. ACCESSORIES Visors in various tints and mirror coatings are available for the SHOEI NEOTEC3, which can be used in compliance with the ECE homologation guidelines. The helmet is equipped with a CNS-3C visor as standard. Anti-fog PINLOCK EVO lenses can be fitted in all available visors of this type, one of which is included with the helmet. The integrated, dark-tinted sun visor type QSV-2 can be exchanged for a yellow-tinted version with contrast-enhancing effect from SHOEI's range of accessories. The SHOEI range of accessories also includes cheek pads with or without noise isolator, center pads in various sizes and thicknesses, and a retractable pad for the upper head area. They can be used to replace the original pads or to adjust the fit of the helmet to individual needs. Also available are a chin strap pad, a Breath Guard and a Chin Curtain in synthetic leather. The SENA SRL3 Mesh communication system from the SHOEI accessory range can be inserted into the SHOEI COMLINK interface of the NEOTEC3. After pairing with a mobile phone, a navigation device or other intercom devices, the SRL3 Mesh offers the possibility of information and entertainment while driving and, at the same time, fits into the helmet shell of the NEOTEC3 almost invisibly. With its high-end speakers, high-quality microphone and sound system from harman/kardon, the SRL3 Mesh delivers rich sound and crystal-clear voice transmission. SCOPE OF DELIVERY Included with the SHOEI NEOTEC3 is a PINLOCK EVO lens for use with the standard CNS-3C visor, matching replacement pins and a small maintenance tool useful for installing the SRL communication system. Also included are a Breath Guard, a Chin Curtain (already fitted), SHOEI logo stickers, an original SHOEI helmet bag to store the helmet gently, and a silicone oil to care for the visor seal and mechanism. In the helmet manual as well as in the brochure " How to use your helmet properly" you will find valuable information on the use, maintenance and care of the SHOEI NEOTEC3.
€669.99*
VERSATILE FLIP-UP HELMET With the NEOTEC3, SHOEI continues the series of its successful flip-up helmet models with the "TEC" in the name. Whether in everyday city traffic, on evening trips into the curvy countryside or on extended motorbike tours with like-minded people - the NEOTEC3 impresses with outstanding features for all purposes. The large integrated QSV-2 sun visor, for example, offers excellent glare protection even in low sun. Certified according to the current test standard ECE-R 22.06, the NEOTEC3 is also suitable for use with the chin bar open at adapted speeds, thanks to P/J homologation. When the helmet is completely closed, an integrated, deeply branched ventilation system provides fresh air and cooling. The revolutionary SHOEI COMLINK interface allows perfect integration of the SRL3 MESH communication system from SENA. Smooth outer surfaces and transitions keep the driver's or rider's noise exposure at a low level. The micro ratchet closure on the pleasantly narrow chin strap makes it easy to put on and take off this incomparably high-quality flip-up helmet model from SHOEI. SAFETY The outer shell of the SHOEI NEOTEC3 made of AIM (Advanced Integrated Matrix) in combination with a polystyrene core system composed of several elements with different absorption capacities offers optimum impact protection that meets the requirements of the ECE-R 22.06 test standard. The SHOEI NEOTEC3 equally fulfils the requirements of this test standard for full-face helmets and jet helmets. In addition to the recommended use with the chin bar closed, a second, stable snap-in position also allows the helmet to be used with the chin bar open and locked. The clear CNS-3C visor, mounted as standard, opens up an almost unrestricted horizontal and vertical field of vision. The anti-fog PINLOCK EVO lens supplied with the helmet ensures unobstructed vision even in adverse weather conditions. The pleasantly slim chin strap with micro ratchet closure is comfortable to use and holds the helmet securely in place. A stainless steel locking mechanism locks the chin bar securely and reliably in the closed position. WEARING COMFORT 3 different outer shell sizes (XS-M | L | XL-XXL) allow for a wide size range of the SHOEI NEOTEC3 and at the same time an optimal ratio of helmet to rider size. A good balance of the helmet protects the neck muscles and prevents fatigue, both in inner-city commuting and on extended tours or long motorbike trips. The three-dimensionally shaped center pad, the pre-shaped cheek pads with noise isolator as well as the chin strap pad are completely removable and washable. For individual adjustment of the helmet, center and cheek pads are available in different thicknesses. A pad that can be inserted in the upper head area can be used to adjust the fit of the helmet vertically. Cheek pads with a voluminous underside and extended to the back of the head, together with the removable ear pads, effectively contribute to noise reduction. The CNS-3C visor, fitted as standard, prevents draughts and rainwater from entering the helmet with its characteristic upper edge that is inclined towards the helmet shell. It can be opened without torsion and closed reliably with the centrally positioned locking mechanism. For additional fresh air while riding, the visor mechanism allows the visor to be opened a gap wide. The visor can be changed without tools thanks to the proven, self-adjusting quick-change mechanism. The integrated, high-quality QSV-2 sun visor of the SHOEI NEOTEC3 is continuously extendable and covers the usable field of vision almost completely, even downwards. It can be replaced easily and without tools by an optional yellow-tinted visor with a contrast-enhancing effect. This additional visor thus ensures optimum visibility for many uses and weather conditions. Recesses in the ear area, prepared cable guides and installation positions for the unit parts allow for easy and quick installation of the SRL3 communication system by SENA available in SHOEI's range of accessories. VENTILATION Ventilation inlets directly into the airstream take in fresh air to reduce the temperature and humidity inside the SHOEI NEOTEC3. A removable filter in the lower front ventilation prevents insects from entering. Raised ventilation controls allow the helmet to be operated even when wearing thick gloves, making it suitable for use in cold temperature zones or during the cold season. AERODYNAMICS Smooth surfaces and transitions reduce the helmet's wind resistance and the wearer's exposure to noise, but allow the integrated spoilers on the sides and back of the helmet and thus the sporty character of the SHOEI NEOTEC3 to be seen. A stable mechanism ensures an eccentric turning movement of the chin bar when opening and closing, and allows the smallest gaps between the chin bar and the helmet shell. The transition area between the chin bar and the helmet shell is smooth to reduce turbulence in the ear area and the associated noise. ACCESSORIES Visors in various tints and mirror coatings are available for the SHOEI NEOTEC3, which can be used in compliance with the ECE homologation guidelines. The helmet is equipped with a CNS-3C visor as standard. Anti-fog PINLOCK EVO lenses can be fitted in all available visors of this type, one of which is included with the helmet. The integrated, dark-tinted sun visor type QSV-2 can be exchanged for a yellow-tinted version with contrast-enhancing effect from SHOEI's range of accessories. The SHOEI range of accessories also includes cheek pads with or without noise isolator, center pads in various sizes and thicknesses, and a retractable pad for the upper head area. They can be used to replace the original pads or to adjust the fit of the helmet to individual needs. Also available are a chin strap pad, a Breath Guard and a Chin Curtain in synthetic leather. The SENA SRL3 Mesh communication system from the SHOEI accessory range can be inserted into the SHOEI COMLINK interface of the NEOTEC3. After pairing with a mobile phone, a navigation device or other intercom devices, the SRL3 Mesh offers the possibility of information and entertainment while driving and, at the same time, fits into the helmet shell of the NEOTEC3 almost invisibly. With its high-end speakers, high-quality microphone and sound system from harman/kardon, the SRL3 Mesh delivers rich sound and crystal-clear voice transmission. SCOPE OF DELIVERY Included with the SHOEI NEOTEC3 is a PINLOCK EVO lens for use with the standard CNS-3C visor, matching replacement pins and a small maintenance tool useful for installing the SRL communication system. Also included are a Breath Guard, a Chin Curtain (already fitted), SHOEI logo stickers, an original SHOEI helmet bag to store the helmet gently, and a silicone oil to care for the visor seal and mechanism. In the helmet manual as well as in the brochure " How to use your helmet properly" you will find valuable information on the use, maintenance and care of the SHOEI NEOTEC3.
€769.99*
Only 2 available
The NXR2 compresses the essential features of a sporty road helmet. Focussed & powerful. It concentrates all our knowledge of advanced helmet development. Experience pure Performance! Security: Shock-absorbing helmet shell made from AIM Multi-part polystyrene core system with different degrees of damping Anti-fog CWR-F2 Pinlock® visor Double-D fastener E.Q.R.S. safety system (Emergency Quick Release System) Comfort: Helmet outer shells in 4 sizes (XXS-S/ M/ L/ XL-XXL) 3D moulded centre pad Cheek pads in various thicknesses (31, 35, 39, 43 mm) All pads removable, washable Ear pads Prepared for intercom Ventilation: Multiple ventilation and air extraction 6 inlets on forehead & chin 4 outlets at the back of the head & neck Aerodynamics: Integrated spoiler
€599.99*
Only 1 available
The NXR2 compresses the essential features of a sporty road helmet. Focussed & powerful. It concentrates all our knowledge of advanced helmet development. Experience pure Performance! Security: Shock-absorbing helmet shell made from AIM Multi-part polystyrene core system with different degrees of damping Anti-fog CWR-F2 Pinlock® visor Double-D fastener E.Q.R.S. safety system (Emergency Quick Release System) Comfort: Helmet outer shells in 4 sizes (XXS-S/ M/ L/ XL-XXL) 3D moulded centre pad Cheek pads in various thicknesses (31, 35, 39, 43 mm) All pads removable, washable Ear pads Prepared for intercom Ventilation: Multiple ventilation and air extraction 6 inlets on forehead & chin 4 outlets at the back of the head & neck Aerodynamics: Integrated spoiler
€599.99*
The NXR2 compresses the essential features of a sporty road helmet. Focussed & powerful. It concentrates all our knowledge of advanced helmet development. Experience pure Performance! Security: Shock-absorbing helmet shell made from AIM Multi-part polystyrene core system with different degrees of damping Anti-fog CWR-F2 Pinlock® visor Double-D fastener E.Q.R.S. safety system (Emergency Quick Release System) Comfort: Helmet outer shells in 4 sizes (XXS-S/ M/ L/ XL-XXL) 3D moulded centre pad Cheek pads in various thicknesses (31, 35, 39, 43 mm) All pads removable, washable Ear pads Prepared for intercom Ventilation: Multiple ventilation and air extraction 6 inlets on forehead & chin 4 outlets at the back of the head & neck Aerodynamics: Integrated spoiler
From €479.99*
The NXR2 compresses the essential features of a sporty road helmet. Focussed & powerful. It concentrates all our knowledge of advanced helmet development. Experience pure Performance! Security: Shock-absorbing helmet shell made from AIM Multi-part polystyrene core system with different degrees of damping Anti-fog CWR-F2 Pinlock® visor Double-D fastener E.Q.R.S. safety system (Emergency Quick Release System) Comfort: Helmet outer shells in 4 sizes (XXS-S/ M/ L/ XL-XXL) 3D moulded centre pad Cheek pads in various thicknesses (31, 35, 39, 43 mm) All pads removable, washable Ear pads Prepared for intercom Ventilation: Multiple ventilation and air extraction 6 inlets on forehead & chin 4 outlets at the back of the head & neck Aerodynamics: Integrated spoiler
€599.99*
The NXR2 compresses the essential features of a sporty road helmet. Focussed & powerful. It concentrates all our knowledge of advanced helmet development. Experience pure Performance! Security: Shock-absorbing helmet shell made from AIM Multi-part polystyrene core system with different degrees of damping Anti-fog CWR-F2 Pinlock® visor Double-D fastener E.Q.R.S. safety system (Emergency Quick Release System) Comfort: Helmet outer shells in 4 sizes (XXS-S/ M/ L/ XL-XXL) 3D moulded centre pad Cheek pads in various thicknesses (31, 35, 39, 43 mm) All pads removable, washable Ear pads Prepared for intercom Ventilation: Multiple ventilation and air extraction 6 inlets on forehead & chin 4 outlets at the back of the head & neck Aerodynamics: Integrated spoiler
€599.99*